Show simple item record

contributor authorM. J. Chappel
contributor authorR. W. I. Brachman
contributor authorW. A. Take
contributor authorR. K. Rowe
date accessioned2017-05-08T21:47:30Z
date available2017-05-08T21:47:30Z
date copyrightJune 2012
date issued2012
identifier other%28asce%29gt%2E1943-5606%2E0000658.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/62440
description abstractWrinkles are buckles or waves that develop from restrained thermal expansion when the geomembrane is left exposed to solar heating. Wrinkles can substantially reduce the effectiveness of the geomembrane as a hydraulic barrier if a hole is at or near a wrinkle, depending on the number, length, and width of wrinkles. Low altitude aerial photography and digital image analysis are used to quantify the nature and extent of wrinkles that developed over one hot and sunny day in a smooth, black, 1.5-mm-thick high-density polyethylene (HDPE) geomembrane over a 55 m by 140 m area. Wrinkles were found to significantly vary over the course of the day, increasing from the fewest wrinkles in the morning to a maximum just after noon before decreasing toward the late afternoon. For the specific conditions examined, wrinkles were found to occupy 3%, 21%, and 7% of the entire area surveyed at 8:45, 12:25, and 17:15, respectively. Connections between adjacent wrinkles were observed to create significant interconnected wrinkle features greater than 2,000 m long. The shortest maximum interconnected wrinkle feature of
publisherAmerican Society of Civil Engineers
titleLarge-Scale Quantification of Wrinkles in a Smooth Black HDPE Geomembrane
typeJournal Paper
journal volume138
journal issue6
journal titleJournal of Geotechnical and Geoenvironmental Engineering
identifier doi10.1061/(ASCE)GT.1943-5606.0000643
treeJournal of Geotechnical and Geoenvironmental Engineering:;2012:;Volume ( 138 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record