Exhumed Geogrid-Reinforced Retaining Wall

Abstract

An instrumented geogrid-reinforced wall constructed on a highly compressible foundation was deconstructed 16 months after its completion, providing a unique opportunity to exhume and examine the instrumented geogrids that were used to construct the wall. The objectives of this post mortem study were: (1) to inspect the condition of the strain gauges that were attached to the geogrid layers before construction and to verify the reliability of their output; (2) to develop a procedure in which the residual (plastic) strains along exhumed geogrid panels could be determined; and (3) to assess the in situ strain and force distribution along geogrid panels based on the measured residual strains from the exhumed geogrids. After exhumation, it was observed that many of the attached strain gauges failed due to full or partial debonding from the geogrid, thus rendering outputs which potentially underestimated the actual strain. Combining aperture measurements of virgin and exhumed geogrids, all from the same manufacturing lots, enabled the assessment of residual strains following stress relaxation. Laboratory simulation of loading and unloading, including creep and relaxation, yielded a relationship between the measured residual strains and the in situ strain and force distribution; i.e., the residual strain fingerprint provided insight into the behavior of the geogrids within the wall prior to its deconstruction. The mobilized maximum tensile strains in the geogrid panels along the height of the wall were roughly uniform, in the range