| description abstract | This paper presents the results of a systematic laboratory investigation on the static behavior of silica sand containing various amounts of either plastic or nonplastic fines. Specimens were reconstituted using a new technique suitable for element testing of homogeneous specimens of sands containing fines deposited in water (e.g., alluvial deposits, hydraulic fills, tailings dams, and offshore deposits). The fabric of sands containing fines was examined using the environmental scanning electron microscope (ESEM). Static, monotonic, isotropically consolidated, drained triaxial compression tests were performed to evaluate the stress-strain-volumetric response of these soils. Piezoceramic bender element instrumentation was developed and integrated into a conventional triaxial apparatus; shear-wave velocity measurements were made to evaluate the small-strain stiffness of the sands tested at various states. The intrinsic parameters that characterize critical state, dilatancy, and small-strain stiffness of clean, silty, and clayey sands were determined. All aspects of the mechanical behavior investigated in this study (e.g., stress-strain-volumetric response, shear strength, and small-strain stiffness) are affected by both the amount and plasticity of the fines present in the sand. Microstructural evaluation using the ESEM highlighted the importance of soil fabric on the overall soil response. | |
