Show simple item record

contributor authorF. Melinda
contributor authorH. Rahardjo
contributor authorK. K. Han
contributor authorE. C. Leong
date accessioned2017-05-08T21:28:01Z
date available2017-05-08T21:28:01Z
date copyrightAugust 2004
date issued2004
identifier other%28asce%291090-0241%282004%29130%3A8%28807%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/52548
description abstractLandslides in residual soil slopes are commonly induced by rainfall infiltration. These residual soils are typically in an unsaturated state with negative pore-water pressures or matric suctions since the groundwater tables in steep slopes are often deep. The net normal and shear stresses of the soil remain essentially constant during rainwater infiltration into the slope. Failure of the slope during rainfall can be primarily associated with the decrease in the matric suction of the soil. The objective of the study was to investigate the strength and deformation characteristics of a residual soil of the Bukit Timah Granitic Formation during infiltration that leads to slope failure. There were two modified direct shear apparatuses used. One apparatus was used for the determination of shear strength under controlled suction conditions while the other apparatus was used for shearing-infiltration tests. The shearing-infiltration test results were compared with the shear strength values obtained from the shearing tests under constant suction. The shearing-infiltration test results indicate a close relationship between the decreasing matric suction and the increasing displacement rate of the soil specimen. At the initial part of the infiltration process, there is a rapid reduction in matric suction that is accompanied by little movement in the soil. When failure of the soil is imminent, the soil movement will accelerate.
publisherAmerican Society of Civil Engineers
titleShear Strength of Compacted Soil under Infiltration Condition
typeJournal Paper
journal volume130
journal issue8
journal titleJournal of Geotechnical and Geoenvironmental Engineering
identifier doi10.1061/(ASCE)1090-0241(2004)130:8(807)
treeJournal of Geotechnical and Geoenvironmental Engineering:;2004:;Volume ( 130 ):;issue: 008
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record