Show simple item record

contributor authorScott A. Ashford
contributor authorTeerawut Juirnarongrit
date accessioned2017-05-08T21:27:39Z
date available2017-05-08T21:27:39Z
date copyrightMarch 2003
date issued2003
identifier other%28asce%291090-0241%282003%29129%3A3%28234%29.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/52314
description abstractThis paper presents the results of a study on the effect of pile diameter on the initial modulus of subgrade reaction. A series of ambient and impact vibration tests were performed on four different diameters of cast-in-drilled-hole piles to determine the natural frequencies and damping of the soil-pile systems. The measured natural frequencies were then compared with those estimated from a numerical model. The soil springs in the numerical model were established by implementing two different concepts on initial modulus of subgrade reaction. One is based on Terzaghi’s concept in which the modulus of subgrade reaction is independent of pile diameter. The other was based on recent research suggesting that the initial modulus of subgrade reaction may be linearly proportional to pile diameter. It was found that the measured natural frequencies were in good agreement with the computed ones when the diameter-independent modulus of subgrade reaction was employed. In addition, the test results show that the damping ratio of the system varied with pile diameter from 3% for 0.4-m pile to 25% for 1.2-m pile.
publisherAmerican Society of Civil Engineers
titleEvaluation of Pile Diameter Effect on Initial Modulus of Subgrade Reaction
typeJournal Paper
journal volume129
journal issue3
journal titleJournal of Geotechnical and Geoenvironmental Engineering
identifier doi10.1061/(ASCE)1090-0241(2003)129:3(234)
treeJournal of Geotechnical and Geoenvironmental Engineering:;2003:;Volume ( 129 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record