Show simple item record

contributor authorYamamoto, Keita
contributor authorUkai, Satoshi
contributor authorFukuda, Taro
contributor authorKawasaki, Satoshi
contributor authorNegishi, Hideyo
date accessioned2023-11-29T18:36:01Z
date available2023-11-29T18:36:01Z
date copyright5/15/2023 12:00:00 AM
date issued5/15/2023 12:00:00 AM
date issued2023-05-15
identifier issn0098-2202
identifier otherfe_145_09_091501.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4294251
description abstractAn accurate prediction method of cavitation surge is desired to design a reliable turbopump for rocket engines that allow complex operational sequences such as controlled reentry and landing. Therefore, the paper aims to develop a novel model that enables accurate predictions of both frequency and onset of cavitation surge by considering dynamic characteristics of cavitation compliance K and mass flow gain factor M. The paper conducts both experimental and numerical studies in an inducer known to cause cavitation surge. First, characteristics of cavitation surge including frequency and occurrence conditions are experimentally surveyed. Secondary, K and M for the studied inducer are numerically obtained by steady RANS simulations. Then, the one-dimensional model is initially established based on the premises acquired by performed experiments and applied to cavitation surge predictions using quasi-statically evaluated K and M. As a result of comparisons with experiments, the cavitation surge frequency is adequately evaluated by the established model, whereas the cavitation surge onset fails to be estimated only using quasi-static parameters. The new model is thus proposed by including dynamic characteristics of K and M, and it is mathematically clarified that phase properties of K and M may play a key role to trigger cavitation surge. By presuming adequate values of dynamic characteristics based on past literatures, consequently, the developed model succeeds in accurate predictions of the cavitation surge onset in the experiment. This evidences that dynamic characteristics of K and M are essential to predict cavitation surge quantitatively.
publisherThe American Society of Mechanical Engineers (ASME)
titleEstablishment of Prediction Model for Cavitation Surge Frequency and Onset in an Inducer Considering Dynamic Characteristics of Cavitation Compliance and Mass Flow Gain Factor
typeJournal Paper
journal volume145
journal issue9
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.4062377
journal fristpage91501-1
journal lastpage91501-15
page15
treeJournal of Fluids Engineering:;2023:;volume( 145 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record