| contributor author | Ntholeng, Nthabiseng | |
| contributor author | Mphasha, Nthape Percyval | |
| contributor author | Bopape, Itshepeng Mogaleadi Christinah | |
| contributor author | Ogunmuyiwa, Enoch Nifise | |
| contributor author | Shongwe, Mxolisi Brendon | |
| date accessioned | 2023-08-16T18:03:24Z | |
| date available | 2023-08-16T18:03:24Z | |
| date copyright | 11/4/2022 12:00:00 AM | |
| date issued | 2022 | |
| identifier issn | 0742-4787 | |
| identifier other | trib_145_2_021703.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4291315 | |
| description abstract | The influence of annealing on the microstructure, mechanical and sliding wear characteristics of Ni-based alloys produced by spark plasma sintering (SPS) was investigated. As-sintered alloys had a lamellar-like microstructure consisting of (γ′)-FeNi3 and γ-(NiFe) phases blended together. Lower Co contents (i.e., 30, 35 wt%) led to the formation of poorly bonded coarse γ precipitate islands. Annealed Ni-5Fe-45Co alloy exhibited the most excellent wear performance with the lowest coefficients of friction (0.142 ± 0.05) and wear-rate (0.3 ± 0.02 × 10−4 mm3/Nm). Annealing resulted in alloys with good strength-ductility combinations due to appreciable γ′ precipitation enhancement. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Tribological Behavior of Annealed Ni-xFe-yCo Alloys: Effect of Co and Fe Additions | |
| type | Journal Paper | |
| journal volume | 145 | |
| journal issue | 2 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4055997 | |
| journal fristpage | 21703-1 | |
| journal lastpage | 21703-11 | |
| page | 11 | |
| tree | Journal of Tribology:;2022:;volume( 145 ):;issue: 002 | |
| contenttype | Fulltext | |
