Show simple item record

contributor authorSingh, Akhilendra Pratap
contributor authorSonawane, Utkarsha
contributor authorAgarwal, Avinash Kumar
date accessioned2022-05-08T09:34:52Z
date available2022-05-08T09:34:52Z
date copyright3/22/2022 12:00:00 AM
date issued2022
identifier issn0195-0738
identifier otherjert_144_10_102304.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4285312
description abstractPrimary alcohols such as methanol, ethanol, and butanol have exhibited excellent potential as possible alternative fuels for spark ignition (SI) engines because they are renewable, cleaner, and safer to store and transport. However, it is important to investigate the technical feasibility of adapting these primary alcohols in existing SI engines. In this research, a multi-point port fuel injection (MPFI) system equipped SI engine was used for assessing and comparing the combustion, performance, and emission characteristics of various alcohol-gasoline blends (gasohols) vis-à-vis baseline gasoline. The experiments were performed at different engine loads at rated engine speed. Experimental results exhibited relatively superior combustion characteristics of the engine fueled with gasohol than the baseline gasoline, especially at medium engine loads. Among different test fuels, the methanol-gasoline blend (GM10) exhibited relatively more stable combustion characteristics than the ethanol-gasoline blend (GE10) and butanol-gasoline blend (GB10). In this study, relatively superior engine performance of the gasohol-fueled engine was observed at all engine loads and speeds. GB10 exhibited the highest brake thermal efficiency (BTE), followed by GM10 amongst all test fuels. The effect of improved combustion was also reflected in the emission characteristics, which exhibited that GB10 emitted relatively lower carbon monoxide (CO) and hydrocarbons (HCs) than other test fuels. GB10 emitted relatively higher nitrogen oxides (NOx) than GM10 and GE10. Unregulated emission results exhibited that the engine fueled with gasohols emitted relatively lower sulfur dioxide (SO2), ammonia (NH3), and various other saturated and unsaturated HCs than the baseline gasoline. The GM10-fueled engine was relatively more effective in reducing unregulated emissions among all test fuels. This study concluded that methanol and butanol blending with gasoline resulted in superior engine performance and reduced harmful emissions in MPFI transport engines. This offered an excellent option to displace fossil fuels partially and reduce emissions simultaneously.
publisherThe American Society of Mechanical Engineers (ASME)
titleMethanol/Ethanol/Butanol-Gasoline Blends Use in Transportation Engine—Part 1: Combustion, Emissions, and Performance Study
typeJournal Paper
journal volume144
journal issue10
journal titleJournal of Energy Resources Technology
identifier doi10.1115/1.4053985
journal fristpage102304-1
journal lastpage102304-11
page11
treeJournal of Energy Resources Technology:;2022:;volume( 144 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record