Erratum: “Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels” [J. Turbomach. 139(2), p. 021003
DOI: 10.1115/1.4034555]
| contributor author | Stimpson, Curtis K. | |
| contributor author | Snyder, Jacob C. | |
| contributor author | Thole, Karen A. | |
| contributor author | Mongillo, Dominic | |
| date accessioned | 2022-05-08T08:55:05Z | |
| date available | 2022-05-08T08:55:05Z | |
| date copyright | 2/17/2022 12:00:00 AM | |
| date issued | 2022 | |
| identifier issn | 0889-504X | |
| identifier other | turbo_144_4_047001.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4284505 | |
| description abstract | There is an error in the original paper in the description of the applicability range for Eq. (9) that could misguide the reader. The valid range of Eq. (9) is Ra/Dh > | |
| description abstract | 0.0028.On page 8, in the paragraph following Eq. (9), the statements on the applicability of the correlation should read:“This correlation is only valid for Ra/Dh > | |
| description abstract | 0.0028 as values below this threshold result in a negative ks/Dh. Relative equivalent sand grain roughness should be assumed to equal zero for Ra/Dh < | |
| description abstract | 0.0028.” | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Erratum: “Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels” [J. Turbomach. 139(2), p. 021003 | |
| title | DOI: 10.1115/1.4034555] | |
| type | Journal Paper | |
| journal volume | 144 | |
| journal issue | 4 | |
| journal title | Journal of Turbomachinery | |
| identifier doi | 10.1115/1.4042129 | |
| journal fristpage | 47001-1 | |
| journal lastpage | 47001-1 | |
| page | 1 | |
| tree | Journal of Turbomachinery:;2022:;volume( 144 ):;issue: 004 | |
| contenttype | Fulltext |
