Erratum: “Revisiting the ASME Pressure–Viscosity Report Using the Tait-Doolittle Correlations” [ASME J. Tribol., 2021, 143(6), p. 061901
DOI: 10.1115/1.4048605]
| contributor author | Zolper, Thomas J. | |
| contributor author | Bair, Scott | |
| contributor author | Horne, Kyle | |
| date accessioned | 2022-05-08T08:44:05Z | |
| date available | 2022-05-08T08:44:05Z | |
| date copyright | 11/12/2021 12:00:00 AM | |
| date issued | 2021 | |
| identifier issn | 0742-4787 | |
| identifier other | trib_144_2_027001.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4284278 | |
| description abstract | Table 3 should be corrected as shown below to list a reference temperature of 311 K which was used throughout the Zolper et al. [1] manuscript. The fit parameters in the table are unchanged.The authors originally used Blok’s integral to calculate the pressure–viscosity index. On further review, it was found that Bair and Qureshi’s [2] equation below gives better results(5)α*=[η0αNηN+∑i=1Nη0αiηi−ηi−1ηiηi−1]−1,αi=ln(ηi/ηi−1)Pi−Pi−1 | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Erratum: “Revisiting the ASME Pressure–Viscosity Report Using the Tait-Doolittle Correlations” [ASME J. Tribol., 2021, 143(6), p. 061901 | |
| title | DOI: 10.1115/1.4048605] | |
| type | Journal Paper | |
| journal volume | 144 | |
| journal issue | 2 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4052778 | |
| journal fristpage | 27001-1 | |
| journal lastpage | 27001-2 | |
| page | 2 | |
| tree | Journal of Tribology:;2021:;volume( 144 ):;issue: 002 | |
| contenttype | Fulltext |
