Show simple item record

contributor authorFan Wu
contributor authorHuiyu Chen
contributor authorKaizhe Hou
contributor authorZhanhong Cheng
contributor authorTony Z. Qiu
date accessioned2022-05-07T20:46:41Z
date available2022-05-07T20:46:41Z
date issued2022-02-04
identifier otherJTEPBS.0000659.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4282888
description abstractPushbutton control is ideal for midblock crossings with low pedestrian and vehicle demand, but it causes significant interruptions to traffic flow with frequent pedestrian crossing requests. Therefore, we propose an adaptive midblock crossing control (AMCC) that minimizes the impact of the pushbutton on traffic flow while maintaining a reasonably short pedestrian wait time (PWT). We regard the midblock crossing and two adjacent intersections as an integrated system and propose two types of AMCCs—AMCC-band and AMCC-vehicle—based on different types of real-time information. AMCC-band seeks the best PWT at the midblock crossing to minimize the green band loss with downstream intersections using the signal control status of adjacent intersections. Alternatively, AMCC-vehicle leverages real-time vehicle location information [e.g., obtained from vehicle-to-infrastructure (V2I) communication, connected vehicles (CVs), or advanced sensors] to minimize the estimated number of affected vehicles. Our study tests AMCC in the software Simulation of Urban MObility (SUMO) with a two-intersection traffic network. Results show that using AMCC at a midblock crossing significantly reduces vehicle delay under a wide range of traffic conditions compared to using a fixed phase and timing (Fixed) control or a pedestrian light-controlled (Pelican) crossing. The average pedestrian delay of AMCC is slightly above Pelican but much lower than Fixed. In addition, the two types of AMCCs work equally well in reducing vehicle delay, but the AMCC-vehicle has a considerably lower pedestrian delay. The results demonstrate the advantages of AMCC in reducing vehicle and pedestrian delay and vehicle stops, improving traffic efficiency at the arterial. Furthermore, the sensitivity analysis shows that the AMCC approach is adaptive to a broad range of traffic demands. Our method extends the application scope of common pushbutton control methods. We conclude that AMCC contributes to a more traffic-efficient, more pedestrian-friendly, and safer transportation system.
publisherASCE
titleAdaptive Pushbutton Control for Signalized Pedestrian Midblock Crossings
typeJournal Paper
journal volume148
journal issue4
journal titleJournal of Transportation Engineering, Part A: Systems
identifier doi10.1061/JTEPBS.0000659
journal fristpage04022011
journal lastpage04022011-11
page11
treeJournal of Transportation Engineering, Part A: Systems:;2022:;Volume ( 148 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record