Experiment and Analysis of Seismically Isolated Single-Layer Cylindrical Reticulated Shell StructureSource: Journal of Structural Engineering:;2022:;Volume ( 148 ):;issue: 004::page 04022009DOI: 10.1061/(ASCE)ST.1943-541X.0003262Publisher: ASCE
Abstract: To explore the seismic response, influence mechanism, and failure of long-span spatial structures with three-dimensional seismic excitations in a strong earthquake, 1/6-scale shaking-table tests of single-layer cylindrical reticulated shell structures with fixed hinged bearings, horizontal isolation bearings, and three-dimensional isolation bearings were conducted with three-dimensional seismic excitations. The accuracy of the numerical simulation method was verified by a numerical reconstruction analysis of the experiments. Dynamic time-history response analysis and incremental dynamic analysis of a full-scale single-layer cylindrical reticulated shell were conducted. The seismic response and failure states of the three-dimensional isolation structure were compared at different positions, different rise-span ratios, and different lower supporting structure heights. Studies have shown that horizontal isolation bearings cannot reduce the vertical vibration frequency and vertical seismic response of a structure; three-dimensional isolation bearings can effectively reduce the vertical vibration frequency and the vertical seismic response of the structure. The degree of plastic development is reduced by 82% in strong earthquakes; the initial plastic development position of the structure changes from the midspan to the four edges, and the ultimate bearing capacity of the structure increases by 40%. For a three-dimensional isolation structure, the natural frequency of the base-isolation structure is smaller, the ultimate bearing capacity is greater, and the isolation effect is better than with story isolation. With an increase in the rise-span ratio, the ultimate bearing capacity of the structure decreases. When the rise-span ratio is 1/2, the bearing capacity is 0.9g, and the structure tends toward dynamic instability. A greater height for the lower support produces a greater ultimate bearing capacity and better isolation.
|
Collections
Show full item record
| contributor author | Niyi Liang | |
| contributor author | Xudong Zhi | |
| contributor author | Guibo Nie | |
| contributor author | Feng Fan | |
| date accessioned | 2022-05-07T20:24:52Z | |
| date available | 2022-05-07T20:24:52Z | |
| date issued | 2022-01-18 | |
| identifier other | (ASCE)ST.1943-541X.0003262.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4282396 | |
| description abstract | To explore the seismic response, influence mechanism, and failure of long-span spatial structures with three-dimensional seismic excitations in a strong earthquake, 1/6-scale shaking-table tests of single-layer cylindrical reticulated shell structures with fixed hinged bearings, horizontal isolation bearings, and three-dimensional isolation bearings were conducted with three-dimensional seismic excitations. The accuracy of the numerical simulation method was verified by a numerical reconstruction analysis of the experiments. Dynamic time-history response analysis and incremental dynamic analysis of a full-scale single-layer cylindrical reticulated shell were conducted. The seismic response and failure states of the three-dimensional isolation structure were compared at different positions, different rise-span ratios, and different lower supporting structure heights. Studies have shown that horizontal isolation bearings cannot reduce the vertical vibration frequency and vertical seismic response of a structure; three-dimensional isolation bearings can effectively reduce the vertical vibration frequency and the vertical seismic response of the structure. The degree of plastic development is reduced by 82% in strong earthquakes; the initial plastic development position of the structure changes from the midspan to the four edges, and the ultimate bearing capacity of the structure increases by 40%. For a three-dimensional isolation structure, the natural frequency of the base-isolation structure is smaller, the ultimate bearing capacity is greater, and the isolation effect is better than with story isolation. With an increase in the rise-span ratio, the ultimate bearing capacity of the structure decreases. When the rise-span ratio is 1/2, the bearing capacity is 0.9g, and the structure tends toward dynamic instability. A greater height for the lower support produces a greater ultimate bearing capacity and better isolation. | |
| publisher | ASCE | |
| title | Experiment and Analysis of Seismically Isolated Single-Layer Cylindrical Reticulated Shell Structure | |
| type | Journal Paper | |
| journal volume | 148 | |
| journal issue | 4 | |
| journal title | Journal of Structural Engineering | |
| identifier doi | 10.1061/(ASCE)ST.1943-541X.0003262 | |
| journal fristpage | 04022009 | |
| journal lastpage | 04022009-23 | |
| page | 23 | |
| tree | Journal of Structural Engineering:;2022:;Volume ( 148 ):;issue: 004 | |
| contenttype | Fulltext |