Show simple item record

contributor authorHolsgrove, Timothy P.
contributor authorZeeman, Martha E.
contributor authorWelch, William C.
contributor authorWinkelstein, Beth A.
date accessioned2022-02-04T14:12:15Z
date available2022-02-04T14:12:15Z
date copyright2020/01/23/
date issued2020
identifier issn0148-0731
identifier otherbio_142_06_061005.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4273174
description abstractOccupational whole-body vibration (WBV) increases the risk of developing low back and neck pain; yet, there has also been an increased use of therapeutic WBV in recent years. Although the resonant frequency (fr) of the spine decreases as the exposure acceleration increases, effects of varying the vibration profile, including peak-to-peak displacement (sptp), root-mean-squared acceleration (arms), and frequency (f), on pain onset are not known. An established in vivo rat model of WBV was used to characterize the resonance of the spine using sinusoidal sweeps. The relationship between arms and fr was defined and implemented to assess behavioral sensitivity—a proxy for pain. Five groups were subjected to a single 30-min exposure, each with a different vibration profile, and a sham group underwent only anesthesia exposure. The behavioral sensitivity was assessed at baseline and for 7 days following WBV-exposure. Only WBV at 8 Hz induced behavioral sensitivity, and the higher arms exposure at 8 Hz led to a more robust pain response. These results suggest that the development of pain is frequency-dependent, but further research into the mechanisms leading to pain is warranted to fully understand which WBV profiles may be detrimental or beneficial.
publisherThe American Society of Mechanical Engineers (ASME)
titlePain After Whole-Body Vibration Exposure Is Frequency Dependent and Independent of the Resonant Frequency: Lessons From an In Vivo Rat Model
typeJournal Paper
journal volume142
journal issue6
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4044547
page61005
treeJournal of Biomechanical Engineering:;2020:;volume( 142 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record