Investigating the Crack Initiation and Propagation of Asphalt Binder in Linear Amplitude Sweep Test

Abstract

The linear amplitude sweep (LAS) test has been widely accepted for estimating the fatigue resistance of asphalt binders in the last 10 years. This paper proposes a fracture mechanics–based analytical approach for crack initiation and propagation characterization in the LAS test, aiming to more precisely explore the binder crack growth and failure mechanism. Seven unmodified neat asphalt binders and one styrene-butadiene-styrene (SBS) polymer-modified binder are selected in this study. The crack length (a), rate of cracking (da/dN), stress intensity factor (K), and energy release rate (G) are the fundamental parameters for the data interpretation approach proposed in this paper. Experimental and analysis results demonstrate that the energy-based failure definition (either from continuum damage mechanics or fracture mechanics) should be utilized to detect the material-dependent failure occurrence in LAS test. The fracture behavior of asphalt binder in the LAS test follows the two-phase crack growth (TPCG) model in terms of the crack initiation and crack propagation. The crack propagation phase further consists of stable crack growth and unstable crack growth. It is found that the fatigue performance of asphalt binder is intrinsically governed and dominated by its resistance to the crack propagation. The SBS binder in this study clearly displays slower crack propagation behavior than other neat binders. Additionally, the traditional fatigue life can also be divided into the crack initiation life and crack propagation life, which is promising to clarify the specific modification contribution to binder fatigue resistance. The two critical crack lengths of initiated crack and propagated crack for a given asphalt binder are found to be correlated to each other, indicating the potential links between the binder crack initiation and propagation behaviors.