Suction Stress Characteristic Curves of Cohesive-Frictional Soils from Multiple Suction-Controlled Testing Methods

Abstract

In most geotechnical construction works, compacted soils of cohesive-frictional nature are expected to remain mostly under partially saturated conditions and hence experience continuous changes in the suction state (negative pore-water pressure) stemming from seasonal weather and temperature variations throughout any given year. Over the last decade, a few studies have demonstrated that the suction stress characteristic curve (SSCC) can be used to describe the state of stress in partially saturated soils and therefore assess, with reasonable accuracy, the additional shear strength contribution resulting from matric or total suction. However, limited experimental data are available to conclusively verify the magnitude of suction stress at rather high values of suction, especially well beyond the residual suction. In the present work, the SSCC for compacted silty sand has been thoroughly assessed in light of recent experimental data obtained from suction-controlled triaxial testing over a wide range of matric and total suction values (0.05–300 MPa). The suction stress in the test soil was observed to increase with increasing suction even beyond the residual suction state, in contrast with findings from previous works reported in the literature for predominantly sandy or clayey soils. In addition, experimental data from suction-controlled true triaxial, ring shear, and plane strain (biaxial) tests, recently conducted on six different types of cohesive-frictional soils in the low-to-medium matric suction range, were also analyzed to obtain the corresponding SSCCs. Finally, suitable model equations are presented in order to best fit the multiple experimental data sets and hence predict the SSCC for each of the test soils under the different suction-controlled testing techniques.