Show simple item record

contributor authorGeng, Zhibo
contributor authorXiao, Ke
contributor authorWang, Jiaxu
contributor authorLi, Junyang
date accessioned2019-09-18T09:08:24Z
date available2019-09-18T09:08:24Z
date copyright6/5/2019 12:00:00 AM
date issued2019
identifier issn1048-9002
identifier othervib_141_5_051008
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4259318
description abstractAt present, the mean value of the meshing stiffness and the gear backlash is a fixed value in the nonlinear dynamic model. In this study, wear is considered in the model of the gear backlash and time-varying stiffness. With the increase of the operating time, the meshing stiffness decreases and the gear backlash increases. A six degrees-of-freedom nonlinear dynamic model of a new rigid-flexible gear pair is established with time-varying stiffness and time-varying gear backlash. The dynamic behaviors of the gear transmission system are studied through bifurcation diagrams with the operating time as control parameters. Then, the dynamic characteristics of the gear transmission system are analyzed using excitation frequency as control parameters at four operating time points. The bifurcation diagrams, Poincaré maps, fast Fourier transform (FFT) spectra, phase diagrams, and time series are used to investigate the state of motion. The results can provide a reference for the gear transmission system with wear.
publisherAmerican Society of Mechanical Engineers (ASME)
titleInvestigation on Nonlinear Dynamic Characteristics of a New Rigid-Flexible Gear Transmission With Wear
typeJournal Paper
journal volume141
journal issue5
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.4043543
journal fristpage51008
journal lastpage051008-12
treeJournal of Vibration and Acoustics:;2019:;volume( 141 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record