Show simple item record

contributor authorDing, Yanan
contributor authorZheng, Sixu
contributor authorMeng, Xiaoyan
contributor authorYang, Daoyong
date accessioned2019-03-17T11:13:33Z
date available2019-03-17T11:13:33Z
date copyright1/9/2019 12:00:00 AM
date issued2019
identifier issn0195-0738
identifier otherjert_141_07_072904.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256824
description abstractIn this study, a novel technique of low salinity hot water (LSHW) injection with addition of nanoparticles has been developed to examine the synergistic effects of thermal energy, low salinity water (LSW) flooding, and nanoparticles for enhancing heavy oil recovery, while optimizing the operating parameters for such a hybrid enhanced oil recovery (EOR) method. Experimentally, one-dimensional displacement experiments under different temperatures (17 °C, 45 °C, and 70 °C) and pressures (about 2000–4700 kPa) have been performed, while two types of nanoparticles (i.e., SiO2 and Al2O3) are, respectively, examined as the additive in the LSW. The performance of LSW injection with and without nanoparticles at various temperatures is evaluated, allowing optimization of the timing to initiate LSW injection. The corresponding initial oil saturation, production rate, water cut, ultimate oil recovery, and residual oil saturation profile after each flooding process are continuously monitored and measured under various operating conditions. Compared to conventional water injection, the LSW injection is found to effectively improve heavy oil recovery by 2.4–7.2% as an EOR technique in the presence of nanoparticles. Also, the addition of nanoparticles into the LSHW can promote synergistic effect of thermal energy, wettability alteration, and reduction of interfacial tension (IFT), which improves displacement efficiency and thus enhances oil recovery. It has been experimentally demonstrated that such LSHW injection with the addition of nanoparticles can be optimized to greatly improve oil recovery up to 40.2% in heavy oil reservoirs with low energy consumption. Theoretically, numerical simulation for the different flooding scenarios has been performed to capture the underlying recovery mechanisms by history matching the experimental measurements. It is observed from the tuned relative permeability curves that both LSW and the addition of nanoparticles in LSW are capable of altering the sand surface to more water wet, which confirms wettability alteration as an important EOR mechanism for the application of LSW and nanoparticles in heavy oil recovery in addition to IFT reduction.
publisherThe American Society of Mechanical Engineers (ASME)
titleLow Salinity Hot Water Injection With Addition of Nanoparticles for Enhancing Heavy Oil Recovery
typeJournal Paper
journal volume141
journal issue7
journal titleJournal of Energy Resources Technology
identifier doi10.1115/1.4042238
journal fristpage72904
journal lastpage072904-16
treeJournal of Energy Resources Technology:;2019:;volume( 141 ):;issue: 007
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record