Show simple item record

contributor authorAdler, Jonas
contributor authorBandhauer, Todd
date accessioned2017-11-25T07:21:16Z
date available2017-11-25T07:21:16Z
date copyright2017/27/6
date issued2017
identifier issn0195-0738
identifier otherjert_139_06_062203.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4237000
description abstractThe current state of the art in waste heat recovery (WHR) from internal combustion engines (ICEs) is limited in part by the low temperature of the engine coolant. In the present study, the effects of operating a diesel engine at elevated coolant temperatures to improve utilization of engine coolant waste heat are investigated. An energy balance was performed on a modified three-cylinder diesel engine at six different coolant temperatures (90 °C, 100 °C, 125 °C, 150 °C, 175 °C, and 200 °C) and 15 different engine loads to determine the impact on waste heat as the coolant temperature increased. The relative brake efficiency of the engine alone decreased between 4.5% and 7.3% as the coolant temperature was increased from 90 °C to 150 °C. However, the engine coolant exergy increased between 20% and 40% over the same interval. The exhaust exergy also increased between 14% and 28% for a total waste heat exergy increase between 19% and 25%. The engine condition was evaluated after testing and problem areas were identified such as overexpansion of pistons, oil breakdown at the piston rings, and head gasket seal failure.
publisherThe American Society of Mechanical Engineers (ASME)
titlePerformance of a Diesel Engine at High Coolant Temperatures
typeJournal Paper
journal volume139
journal issue6
journal titleJournal of Energy Resources Technology
identifier doi10.1115/1.4036771
journal fristpage62203
journal lastpage062203-13
treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record