| contributor author | Correa, E. | |
| contributor author | Mejía, J. F. | |
| contributor author | Castaño, J. G. | |
| contributor author | Echeverría, F. | |
| contributor author | Gómez, M. A. | |
| date accessioned | 2017-11-25T07:19:40Z | |
| date available | 2017-11-25T07:19:40Z | |
| date copyright | 2017/26/5 | |
| date issued | 2017 | |
| identifier issn | 0742-4787 | |
| identifier other | trib_139_05_051302.pdf | |
| identifier uri | http://138.201.223.254:8080/yetl1/handle/yetl/4235939 | |
| description abstract | Ni–B coatings have been deposited directly on commercial purity magnesium and evaluated by means of sliding wear and friction testing. The nickel and boron are distributed throughout the whole thickness of the coating. Parametric optimization has been carried out using the design of experiment based on Taguchi analysis. The friction coefficients of the coatings vary between 0.01 and 0.3, depending on the evaluated conditions. The lowest wear rate of the coating was 0.19 × 10−5 mm3 N−1 m−1. Wear and friction coefficient maps of Ni–B electroless coatings formed on magnesium surfaces are reported. Nanoparticles present in the lubricating fluid act as a third wear body increasing the wear of the electroless coating | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Tribological Characterization of Electroless Ni–B Coatings Formed on Commercial Purity Magnesium | |
| type | Journal Paper | |
| journal volume | 139 | |
| journal issue | 5 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4036169 | |
| journal fristpage | 51302 | |
| journal lastpage | 051302-9 | |
| tree | Journal of Tribology:;2017:;volume( 139 ):;issue: 005 | |
| contenttype | Fulltext | |
