Modeling of an Electropolishing-Assisted Electroless Deposition Process for Microcellular Metal Foam Fabrication

Abstract

Metal foams can be fabricated through metallizing nonconductive polymer templates for better control of pore size, porosity, and interpore connectivity. However, the process suffers from a diffusion limit when the pore size is reduced to micro- and nanoscales. In this research, an electropolishing-assisted electroless deposition (EPAELD) process is developed to fabricate open-celled microcellular metal foams. To overcome the diffusion limit, a polishing current is applied in the electroless deposition process to remove metal on the surface of a polymer template, such that the ion-diffusion channels will remain open and the electroless deposition reaction continues deep inside the polymer template. In this paper, a process model of the proposed EPAELD technique is developed to understand the mechanism and to optimize the proposed process.