Show simple item record

contributor authorGao, Dedong
contributor authorLei, Yong
contributor authorLian, Bin
contributor authorYao, Bin
date accessioned2017-11-25T07:17:33Z
date available2017-11-25T07:17:33Z
date copyright2016/8/8
date issued2016
identifier issn1087-1357
identifier othermanu_138_12_121012.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234640
description abstractNeedle insertion is a widely used medical procedure in various minimally invasive surgeries. The estimation of the coupled needle deflection and tissue deformation during the needle insertion procedure is crucial to the success of the surgery. In this work, a novel needle deflection–tissue deformation coupling model is proposed for flexible needle insertion into soft tissue. Based on the assumption that the needle deflection is small comparing to the length of the insertion, the needle–tissue interaction model is developed based on the modified local constraint method, where the interactive forces between the needle and the tissue are balanced through integration of needle–force and tissue–force relationships. A testbed is constructed and the experiments are designed to validate the proposed method using artificial phantom with markers. Based on the experimental analysis, the cutting and friction forces are separated from the force–time curves and used as the inputs into the proposed model. The trajectories of the markers inside the soft tissue are recorded by a CCD camera to compare with the simulation trajectories. The errors between the experimental and simulation trajectories are less than 0.8 mm. The results demonstrate that the proposed method is effective to model the needle insertion procedure.
publisherThe American Society of Mechanical Engineers (ASME)
titleModeling and Simulation of Flexible Needle Insertion Into Soft Tissue Using Modified Local Constraints
typeJournal Paper
journal volume138
journal issue12
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.4034134
journal fristpage121012
journal lastpage121012-10
treeJournal of Manufacturing Science and Engineering:;2016:;volume( 138 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record