Show simple item record

contributor authorRan Fu, Tai
contributor authorBin Tian, Ji
contributor authorSheng Wang, Hua
date accessioned2017-11-25T07:17:06Z
date available2017-11-25T07:17:06Z
date copyright2017/10/1
date issued2017
identifier issn0022-1481
identifier otherht_139_04_042701.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234400
description abstractSoot aggregates frequently occur during combustion or pyrolysis of fuels. The radiative properties of soot aggregates at high temperature are important for understanding soot characteristics and evaluating heat transfer in combustion systems. However, few data for soot radiative properties at high temperature were available. This work experimentally investigated the apparent emissivity of the soot aggregate coating at high temperature using spectral and total hemispherical measurements. The soot aggregate coatings were formed on nickel substrates by a paraffin flame. The surface and inner morphology of the coatings were characterized by scanning electron microscope (SEM). The thickness of the coating was 30.16 μm so the contribution of the smooth nickel substrate to the apparent radiation from the coating could be neglected. The total hemispherical emissivity of the coating on the nickel substrate was measured using the steady-state calorimetric method at different temperatures. The spectral directional emissivity of the coating was measured for the wavelength of 0.38–16.0 μm at the room temperature. The measurements show that the total hemispherical emissivity decreases from 0.895 to 0.746 as the temperature increases from 438 K to 1052 K. The total hemispherical emissivity of the coating deposited on the nickel substrate is much larger than those of the nickel substrate and a nickel oxidization film. The measured spectral emissivity of the coating at the room temperature was used to theoretically calculate the total hemispherical emissivity at different temperatures by integration with respect to wavelength. The measured and calculated total hemispherical emissivities were similar, but their changes relative to temperature were completely opposite. This difference is due to the fact that the spectral emissivity of the coating is a function of temperature. The present results provide useful reference data for analyzing radiative heat transfer at high temperature of soot aggregates in combustion processes.
publisherThe American Society of Mechanical Engineers (ASME)
titleApparent Emissivity of Combustion Soot Aggregate Coating at High Temperature
typeJournal Paper
journal volume139
journal issue4
journal titleJournal of Heat Transfer
identifier doi10.1115/1.4035102
journal fristpage42701
journal lastpage042701-7
treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record