Show simple item record

contributor authorWeisensee, Patricia B.
contributor authorTian, Junjiao
contributor authorMiljkovic, Nenad
contributor authorKing, William P.
date accessioned2017-11-25T07:16:42Z
date available2017-11-25T07:16:42Z
date copyright2017/6/1
date issued2017
identifier issn0022-1481
identifier otherht_139_02_020902.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234145
description abstractDroplet impact on rigid, superhydrophobic surfaces follows the well-known spreading, recoil, and lift-off behavior at lower impact speeds (a), and splashing at higher impact speeds (b). The contact time tc of these bouncing droplets is independent of the impact speed, and difficult to control. Using high speed imaging (9500 fps) of water droplets impacting superhydrophobic substrates with stiffness 0.5 to 7630 N/m (rigid), we were able to show that substrate flexibility can reduce contact times. Upon impact on a flexible substrate, the droplet excites the substrate to oscillate at the membrane or cantilever natural frequency (d). The oscillation accelerates the droplet upwards, initiating early droplet lift-off at the edges of the droplet close to the point of maximum spreading (c). Droplets fully lift off before fully recoiling, i.e. in a pancake shape. We call this phenomenon the springboard effect. Contact times are reduced by up to 50% compared to rigid substrates.
publisherThe American Society of Mechanical Engineers (ASME)
titleSpringboard Droplet Bouncing on Flexible Superhydrophobic Substrates
typeJournal Paper
journal volume139
journal issue2
journal titleJournal of Heat Transfer
identifier doi10.1115/1.4035572
journal fristpage20902
journal lastpage020902-1
treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record