Numerical Study on the Extremely Rapid Intensification of an Intense Tropical Cyclone: Typhoon Ida (1958)

Abstract

xtremely rapid intensification (ERI) of Typhoon Ida (1958) was examined with a 2-km-mesh nonhydrostatic model initiated at three different times. Ida was an extremely intense tropical cyclone with a minimum central pressure of 877 hPa. The maximum central pressure drop in 24 h exceeded 90 hPa. ERI was successfully simulated in two of the three experiments. A factor crucial to simulating ERI was a combination of shallow-to-moderate convection and tall, upright convective bursts (CBs). Under a strong environmental vertical wind shear (>10 m s?1), shallow-to-moderate convection on the downshear side that occurred around the intense near-surface inflow moistened the inner-core area. Meanwhile, dry subsiding flows on the upshear side helped intensification of midlevel (8 km) inertial stability. First, a midlevel warm core appeared below 10 km in the shallow-to-moderate convection areas, being followed by the development of the upper-level warm core associated with tall convection. When tall, upright, rotating CBs formed from the leading edge of the intense near-surface inflow, ERI was triggered at the area in which the air became warm and humid. CBs penetrated into the upper troposphere, aligning the areas with high vertical vorticity at low to midlevels. The upper-level warm core developed rapidly in combination with the midlevel warm core. Under the preconditioned environment, the formation of the upright CBs inside the radius of maximum wind speeds led to an upright axis of the secondary circulation within high inertial stability, resulting in a very rapid central pressure deepening.