| description abstract | he goal of this research is to investigate the impacts of a stably stratified layer embedded within a neutrally stratified environment on the behavior of density currents in an effort to extend the environmental regimes examined by Liu and Moncrieff. Such environments frequently support severe weather events. To accomplish this goal, nonhydrostatic numerical model experiments are performed in which the strength and height of the embedded stably stratified layer within a neutrally stratified environment are varied. The 1-km-deep stable layer base is varied between 1, 2, and 3 km AGL. Additionally, the strength of the stable layer is systematically varied between Brunt?Väisälä frequencies of 0.006, 0.012, and 0.018 s?1, following the methodology of Liu and Moncrieff. The model and grid setup are also similar to that of Liu and Moncrieff, utilizing the Arakawa C grid, leapfrog advection, a Robert?Asselin filter, and grid spacing of 100 and 50 m in the horizontal and vertical directions, respectively. Results show that the height of the density current decreases and the propagation speed increases with stronger and lower stable layers, provided that the stable layer is sufficiently thin so as to not act as a gravity wave ducting layer. As the strength of the stable layer increases and the height of this layer decreases, the horizontal pressure gradient driving the density current increases, resulting in faster propagation speeds. Such results have implications for cold pool propagation into more stable environments. | |
