| description abstract | Individual structures within the same local-scale (102?104 m) environment may experience different microscale (<103 m) climates. Urban microclimate variations are often a result of site-specific features, including spatial and material characteristics of surfaces and surrounding structures. A semiempirical surface energy balance model is presented that incorporates radiative and meteorological measurements to statistically parameterize energy fluxes that are not measured directly, including sensible heat transport, storage heat flux through conduction, and evaporation (assumed to be negligible under dry conditions). Two Chicago rooftops were chosen for detailed study. The City Hall site was located in an intensely developed urban area characterized by close-set high-rise buildings. The University rooftop was in a highly developed area characterized by three- to seven-story buildings of stone, concrete, and brick construction. Two identical sets of instruments recorded measurements contemporaneously from these rooftops during summer 2005, and results from the week of 29 July to 5 August are presented here. The model explains 83.7% and 96% of the variance for the City Hall and University sites, respectively. Results apply to a surface area of approximately 1260 m2, at length scales similar to the dimensions of built structures and other urban elements. A site intercomparison revealed variations in surface energy balance components caused by site-specific features and demonstrated the relevance of the model to urban applications. | |
