| contributor author | Mario E. Rodriguez | |
| contributor author | Juan C. Botero | |
| contributor author | Jaime Villa | |
| date accessioned | 2017-05-08T20:57:25Z | |
| date available | 2017-05-08T20:57:25Z | |
| date copyright | June 1999 | |
| date issued | 1999 | |
| identifier other | %28asce%290733-9445%281999%29125%3A6%28605%29.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/33197 | |
| description abstract | It is expected that during strong earthquakes, longitudinal reinforcing steel in reinforced concrete structural elements may undergo large tension and compression strain reversals. Because of insufficient tie spacing, this repeated loading into the inelastic range may lead to buckling of steel reinforcing bars. Even though this problem has been studied by several researchers, most of these studies have been based on monotonic behavior. In this research, steel coupons were machined from steel reinforcing bars conforming to most of the ASTM A 706 specifications. These specimens were tested under axial-strain-controlled monotonic and reversed cyclic axial loading. The tests were performed until the specimens failed, in all cases under compressive loading. To study the effects of the ratio of spacing of lateral supports ( | |
| publisher | American Society of Civil Engineers | |
| title | Cyclic Stress-Strain Behavior of Reinforcing Steel Including Effect of Buckling | |
| type | Journal Paper | |
| journal volume | 125 | |
| journal issue | 6 | |
| journal title | Journal of Structural Engineering | |
| identifier doi | 10.1061/(ASCE)0733-9445(1999)125:6(605) | |
| tree | Journal of Structural Engineering:;1999:;Volume ( 125 ):;issue: 006 | |
| contenttype | Fulltext | |