Browsing Journal of Manufacturing Science and Engineering by Title

Now showing items 1-20 of 7598

      • 100th Anniversary Issue of the Manufacturing Engineering Division PaperA Review of Advances in Modeling of Conventional Machining Processes: From Merchant to the Present 

        Melkote; S.;Liang; S.;Özel; T.;Jawahir; I. S.;Stephenson; D. A.;Wang; B. (The American Society of Mechanical Engineers (ASME), 2022)
        This paper presents a review of recent advances in modeling and simulation of conventional metal machining processes, which continue to dominate a significant part of all machining processes, and in recent years, the need ...

      • 1961 Review of Metal Processing Literature 

        J. M. Galimberti; Robert S. Hahn; E. J. Weller; J. H. Crawford; A. L. Pickrell; O. D. Lascoe; Joseph Roubik; R. L. Vaughn; Francis W. Boulger; L. P. Tarasov; N. H. Cook; E. J. Krabacker; Clyde A. Sluhan; R. G. Moyer; P. A. Smith; W. Pentland; J. S. Campbell; S. Kobayashi; W. R. Backer (The American Society of Mechanical Engineers (ASME), 1963)
        By the members of the Literature Review Committee of the Metal Processing Research Activity of ASME: W. Pentland, Cornell University, Chairman; E. G. Thomsen, University of California, Metal ...

      • 1962 Review of Metal Processing Literature 

        J. L. Wennberg; B. F. von Turkovich; E. J. Weller; Francis W. Boulger; R. S. Hahn; P. A. Smith; C. T. Yang; S. Kobayashi; J. M. Galimberti; J. R. Roubik; J. H. Crawford; A. L. Pickrell; L. P. Tarasov; N. H. Cook; E. J. Krabacher; W. R. Backer; C. A. Sluhan; C. E. Downing; M. C. Shaw; F. S. Dorman (The American Society of Mechanical Engineers (ASME), 1964)
        The purpose of this review is to appraise the important contributions to the knowledge of metalworking appearing in the published literature and to present a digest of this new knowledge through ...

      • 1963 Review of Metal Processing Literature 

        B. F. von Turkovich; J. R. Roubik; W. W. Gilbert; Inyon Ham; C. J. Oxford; A. L. Pickrell; G. F. Wilson; F. W. Boulger; R. S. Hahn; E. J. Krabacker; N. H. Cook; L. P. Tarasov; P. A. Smith; C. A. Sluhan; C. E. Downing; J. L. Wennberg; A. Neidzwiedzki; E. J. Weller; W. R. Backer (The American Society of Mechanical Engineers (ASME), 1965)
        By members of the Literature Review Committee of the ASME Metal Processing Research Activity: J. L. Wennberg, General Electric Company, Chairman ; B. F. von Turkovich, University of Illinois, ...

      • 1964 Review of Materials Processing Literature 

        B. F. von Turkovich; J. R. Roubik; J. H. Crawford; W. W. Gilbert; Inyong Ham; C. J. Oxford; A. L. Pickrell; R. L. Vaughn; G. F. Wilson; F. W. Boulger; D. A. Farmer; W. R. Backer; J. A. Mueller; H. T. McAdams; J. E. Price; L. P. Tarasov; P. A. Smith; C. A. Sluhan; J. L. Wennberg; C. A. Reitz; J. S. Campbell; A. O. Schmidt; K. J. Trigger; R. T. Maher (The American Society of Mechanical Engineers (ASME), 1965)
        Committee of the ASME Materials Processing Field: J. L. Wennberg, Therm, Inc., Chairman ; B. F. von Turkovich, University of Illinois, Metal Cutting Analysis; J. R. Roubik, Kearney & Trecker ...

      • 3-Dimensional Circular Interpolation for CNC Machines 

        S. G. Papaioannou; S. L. Omirou (The American Society of Mechanical Engineers (ASME), 1996)
        An efficient and accurate algorithm for generating circular arcs on arbitrary planes is presented and its implementation in the context of CNC is discussed. Besides having significant application ...

      • 3D Ball-End Milling Force Model Using Instantaneous Cutting Force Coefficients 

        Jeong Hoon Ko; Research Associate; Dong-Woo Cho (The American Society of Mechanical Engineers (ASME), 2005)
        Application of a ball-end milling process model to a CAD/CAM or CAPP system requires a generalized methodology to determine the cutting force coefficients for different cutting conditions. In ...

      • 3D Double-Vision Inspection Based on Structured Light 

        Guangjun Zhang; Zhenzhong Wei; Graduate Research Assistant; Xin Li; Graduate Research Assistant (The American Society of Mechanical Engineers (ASME), 2003)
        3D double-vision inspection is very necessary. It has a larger field of view, and can solve the problem of “blind area” for 3D measurement, as proposed by 3D single-vision inspection. At the ...

      • 3D FEA Modeling of Hard Turning 

        Y. B. Guo; C. R. Liu (The American Society of Mechanical Engineers (ASME), 2002)
        A practical explicit 3D finite element analysis model has been developed and implemented to analyze turning hardened AISI 52100 steels using a PCBN cutting tool. The finite element analysis ...

      • 3D Finite Element Modeling of an Assembly Process With Thread Forming Screw 

        Florestan Mathurin; Jean Guillot; Pierre Stéphan; Alain Daidié (The American Society of Mechanical Engineers (ASME), 2009)
        This paper presents a 3D finite element (FE) model of a thread forming screw assembly process based on the ABAQUS 6.5.4 Explicit software program. The model consists of two principal elements: ...

      • 3D Laser Forming of Metal Foam Sandwich Panels 

        Bucher, Tizian; Finn, Connor; Verma, Ravi; Li, Wayne; Lawrence Yao, Y. (The American Society of Mechanical Engineers (ASME), 2020)
        Metal foam sandwich panels have been the subject of many concept studies, due to their exceptional stiffness, light weight, and crash absorption capacity. Yet, the industrial production of the material has been hampered ...

      • 3D Printing of Flexible and Stretchable Parts Using Multiwall Carbon Nanotube/Polyester-Based Thermoplastic Polyurethane 

        Stan, Felicia; Stanciu, Nicoleta-Violeta; Constantinescu, Adriana-Madalina; Fetecau, Catalin (The American Society of Mechanical Engineers (ASME), 2020)
        This paper reports on the 3D printing of flexible and stretchable parts based on multiwall carbon nanotube (MWCNT)/polyester-based thermoplastic polyurethane (TPU) nanocomposites. The rheological properties of the WCNT/TPU ...

      • 4DYNAMO: Analyzing and Optimizing Process Parameters in 4D Printing for Dynamic 3D Shape Morphing Accuracy 

        Biehler, Michael; Lin, Daniel; Mock, Reinaldo; Shi, Jianjun (The American Society of Mechanical Engineers (ASME), 2024)
        Additive manufacturing (AM), commonly referred to as 3D printing, has undergone significant advancements, particularly in the realm of stimuli-responsive 3D printable and programmable materials. This progress has led to ...

      • 5-Axis Freeform Surface Milling Using Piecewise Ruled Surface Approximation 

        G. Elber; R. Fish (The American Society of Mechanical Engineers (ASME), 1997)
        This paper presents a 5-axis side milling scheme for freeform surfaces based on automatic piecewise ruled surface approximation. With this scheme, resulting surface finish is accurate and pleasing, ...

      • A 3D Computational Model of Nanosecond Pulsed Laser Texturing of Metals for Designing Engineered Surfaces 

        Narayanan, Vishnu; Singh, Ramesh; Marla, Deepak (The American Society of Mechanical Engineers (ASME), 2024)
        Laser surface texturing uses a pulsed laser that is scanned on the surface, wherein each pulse creates a micro-crater through material ablation. A variety of textures can be generated depending on the laser parameters and ...

      • A Bayesian Model of Machining Economics for Optimization by Adaptive Control 

        Donald S. Ermer (The American Society of Mechanical Engineers (ASME), 1970)
        A learning model of tool wear based on Bayesian statistical methods provides a means for regulating the optimum cutting conditions as periodic sampling data on flank wear become available during ...

      • A BEM/FEM Framework for Simulation of a Plastic Workpiece Deformed by an Elastic Tool 

        A. J. Beaudoin; S. Mukherjee; P. R. Dawson (The American Society of Mechanical Engineers (ASME), 1995)
        A solution methodology is developed for the simulation of a plastic workpiece deformed by a compliant tool. The solution for elastic tool displacements is based on the Boundary Element Method ...

      • A Boundary Element Method Analysis of the Thermal Aspects of Metal Cutting Processes 

        Cho Lik Chan; Abhijit Chandra (The American Society of Mechanical Engineers (ASME), 1991)
        In this paper, the b oundary e lement m ethod (BEM) approach is used to analyze the thermal aspects of steady state metal cutting processes. Particular attention is paid to modeling of the ...

      • A Brief History of the Progress of Laser Powder Bed Fusion of Metals in Europe 

        Rothfelder, Richard; Nahr, Florian; Chechik, Lova; Bartels, Dominic; Schmidt, Michael (The American Society of Mechanical Engineers (ASME), 8/3/2023 1)
        The progress of additive manufacturing (AM) within the last few decades has been phenomenal, progressing from a polymeric technique to a method for manufacturing metallic aerospace components. We take a look at various ...

      • A Cable Extension Transducer Based Two-Dimensional Position Sensor for Industrial Applications 

        Daehie Hong; Keith J. Mueller; Former Graduate Student; Steven A. Velinsky (The American Society of Mechanical Engineers (ASME), 2002)
        A technique for two-dimensional position measurement is presented through the use of cable-extension transducers. The method includes the use of two such transducers and the planar position is ...