Show simple item record

contributor authorM. Y. Friedman
contributor authorS. M. Wu
contributor authorP. T. Suratkar
date accessioned2017-05-09T01:38:30Z
date available2017-05-09T01:38:30Z
date copyrightNovember, 1974
date issued1974
identifier issn1087-1357
identifier otherJMSEFK-27616#1239_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/164957
description abstractThe surface topography of a coated abrasive was measured by a special designed profilometer with an oscillating stylus, revealing very detailed geometric features of the peaks. The criterion for a peak to be a dynamic active cutting edge is analyzed and the results are applied for the identification of active cutting edges of the measured profiles. The distributions of some geometric properties of the active cutting edges as heights, distances, rake-angles and wear-lands are evaluated for six grades of coated abrasives.
publisherThe American Society of Mechanical Engineers (ASME)
titleDetermination of Geometric Properties of Coated Abrasive Cutting Edges
typeJournal Paper
journal volume96
journal issue4
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3438501
journal fristpage1239
journal lastpage1244
identifier eissn1528-8935
keywordsCutting
keywordsWear AND Abrasives
treeJournal of Manufacturing Science and Engineering:;1974:;volume( 096 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record