Investigation of Flutter Mechanisms of a Contra Rotating Open Rotor

Abstract

The growing pressure to reduce fuel consumption and cut emissions has triggered renewed interest in contrarotating open rotor (CROR) technologies. One of their potential issues is selfexcited or forced vibration of the unducted, lightweight, highly swept blades. This paper presents a numerical study into the flutter behavior of a CROR rig at takeoff conditions. The study presented in this paper aimed to validate the numerical approach and provide insights into the flutter mechanisms of the open rotor under investigation. For the initial validation, pressure profiles and thrust coefficients from steadystate mixing plane calculations were compared against rig measurements. A full domain unsteady analysis predicted front rotor instability at low advance ratios. Flutter occurred in the first torsional mode in 0 and 1 nodal diameter (ND) which agreed with experimental observations. Subsequent unsteady computations focused on the isolated front rotor and first torsional mode. The flow field and aerodynamic damping over a range of advance ratios were studied. It was found that minimum aerodynamic damping occurred at low advance ratios when the flow was highly threedimensional on the suction side. A correlation between the quasisteady loading on the blade and aeroelastic stability was made and related to the numerical results. The effects of variations in frequency were then investigated by linking local aerodynamic damping to the unsteady pressure on the blade surface.