Show simple item record

contributor authorM. Holicky
contributor authorJ. Schroeder
date accessioned2017-05-09T01:32:50Z
date available2017-05-09T01:32:50Z
date copyrightJune, 1972
date issued1972
identifier issn0098-2202
identifier otherJFEGA4-27393#369_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/162389
description abstractA basic solution for in-reactor sag of horizontal pressure tubes is proposed in accordance with a nonlinear anisotropic creep theorem. As an example, numerical solutions for in-reactor sag of cold-worked zircaloy-2 pressure tubes supported at the ends only are given for various combinations of anisotropy coefficients. It is shown that an isotropic analysis may overestimate or underestimate the deflection due to sag by about 100 percent if hoop creep rates are about 50 percent smaller or larger than longitudinal creep rates.
publisherThe American Society of Mechanical Engineers (ASME)
titleAnisotropic In-Reactor Sag of Pressure Tubes
typeJournal Paper
journal volume94
journal issue2
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.3425426
journal fristpage369
journal lastpage372
identifier eissn1528-901X
keywordsPressure
keywordsCreep
keywordsAnisotropy
keywordsDeflection AND Theorems (Mathematics)
treeJournal of Fluids Engineering:;1972:;volume( 094 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record