Show simple item record

contributor authorPlesniak, Michael W.
contributor authorBulusu, Kartik V.
date accessioned2017-05-09T01:29:55Z
date available2017-05-09T01:29:55Z
date issued2016
identifier issn0098-2202
identifier otherfe_138_10_101203.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/161464
description abstractA multiplicity of secondary flow morphologies is produced in the arterial network due to complexities in geometry (such as curvature, branching, and tortuosity) and pulsatility in the blood flow. In clinical literature, these morphologies have been called “spiral blood flow structuresâ€‌ and have been associated with a protective role toward arterial wall damage in the ascending and abdominal aorta. Persistent secondary flow (vortical) structures as observed experimentally in planar cross sections have been associated with flow instabilities. This study presents the results of two rigorous in vitro experimental investigations of secondary flow structures within a 180deg bent tube model of curved arteries. First, phaseaveraged, twocomponent, twodimensional, particle image velocimetry (2C2D PIV) experiments were performed at the George Washington University. Second, phaselocked, threecomponent, threedimensional magnetic resonance velocimetry (3C3D MRV) measurements were done at the Richard M. Lucas Center at Stanford University. Under physiological (pulsatile) inflow conditions, vortical patterns of a variety of scales, swirl magnitudes (strengths), and morphologies were found. A continuous wavelet transform (CWT) algorithm (pivlet 1.2) was developed for coherent structure detection and applied to outofplane vorticity (د‰) fields. Qualitative comparisons of coherent secondary flow structures from the PIV and magnetic resonance velocimetry (MRV) data were made. In addition to the qualitative depiction of such planar vortical patterns, a regime map has also been presented. The phase dependence of the secondary flow structures under physiological flow conditions and the concomitant 3D nature of these vortical patterns required the full resolution of the flow field achieved by MRV techniques.
publisherThe American Society of Mechanical Engineers (ASME)
titleMorphology of Secondary Flows in a Curved Pipe With Pulsatile Inflow
typeJournal Paper
journal volume138
journal issue10
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.4033962
journal fristpage101203
journal lastpage101203
identifier eissn1528-901X
treeJournal of Fluids Engineering:;2016:;volume( 138 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record