Show simple item record

contributor authorAl Ba'ba'a, Hasan B.
contributor authorElgammal, Tarek
contributor authorAmano, Ryoichi S.
date accessioned2017-05-09T01:29:53Z
date available2017-05-09T01:29:53Z
date issued2016
identifier issn0098-2202
identifier otherfe_138_11_114501.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/161452
description abstractPrediction correlations of air bubble diameter and frequency in stagnant clean water were established. Eleven different orifice diameters were tested under flow rate of 0.05–0.15 SLPM. The resulted bubble size and frequency were traced using highspeed camera. It was found that the mean Sauter diameter and bubble frequency are in the range of 3.7–6.9 mm and 6.4–47.2 bubbles per second, respectively. Nonlinear regression was performed to design the new correlations of estimating diameter and frequency with a correlation factor of 0.93 and 0.94, respectively. Flow rate and orifice size had the highest impact on the studied parameters.
publisherThe American Society of Mechanical Engineers (ASME)
titleCorrelations of Bubble Diameter and Frequency for Air–Water System Based on Orifice Diameter and Flow Rate
typeJournal Paper
journal volume138
journal issue11
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.4033749
journal fristpage114501
journal lastpage114501
identifier eissn1528-901X
treeJournal of Fluids Engineering:;2016:;volume( 138 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record