| description abstract | In industrial practice, the floating frame of reference formulation (FFRF)—often combined with the component mode synthesis (CMS) in order to reduce the number of flexible degreesoffreedom—is the common approach to describe arbitrarily shaped bodies in flexible multibody systems. Owed to the relative formulation of the flexible deformation with respect to the reference frame, the equations of motion show statedependent nonconstant inertia terms. Such relative description, however, comes along with considerable numerical costs, since both the mass matrix and gyroscopic forces, i.e., the quadratic velocity vector, need to be evaluated in every integration step. The state dependency of the inertia terms can be avoided by employing an alternative formulation based on the mode shapes as in the classical CMS approach. In this approach, which is referred to as generalized component mode synthesis (GCMS), the total (absolute) displacements are approximated directly. Consequently, the mass matrix is constant, no quadratic velocity vector appears, and the stiffness matrix is a corotated but otherwise constant matrix. In order to represent the same flexible deformation as in the classical FFRFbased CMS, however, a comparatively large number of degreesoffreedom is required. The approach described in the present paper makes use of the fact that a majority of components in technical systems are constrained to motions showing large rotations only about a single spatially fixed axis. For this reason, the GCMS is adapted for multibody systems that are subjected to small flexible deformations and undergo a rigid body motion showing large translations, large rotations about one axis, but small rotations otherwise. Thereby, the number of shape functions representing the flexible deformation is reduced, which further increases numerical efficiency compared to the original GCMS formulation for arbitrary rotations. | |
