Show simple item record

contributor authorMongkolcheep, Kathira
contributor authorRuimi, Annie
contributor authorPalazzolo, Alan
date accessioned2017-05-09T01:24:55Z
date available2017-05-09T01:24:55Z
date issued2015
identifier issn1048-9002
identifier othervib_137_02_021003.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/160010
description abstractDrillstrings used for oil and gas exploration and extraction consist of a drillpipe (slender columns on the order of 3–5 km long), drill collars (DCs) (thickwalled largediameter pipes), stabilizers (cylindrical elements with short sections and diameter near that of the borehole), and a rockcutting tool that uses rotational energy to penetrate the soil. Several types of vibrations ensue from these motions and play a major role in added costs resulting from unforeseen events such as abandoning holes, replacing bits, and fishing severed bottomhole assemblies (BHAs). It is thus of critical importance to understand, predict, and mitigate the severe vibrations experienced by drillstrings and BHA to optimize drilling time while lowering fuel consumption and related emissions of NOX and/or other pollutants. In this paper, we present a dynamical analysis of the behavior of drillstrings due to the violent lateral vibrations (LVs) DCs may experience as a result of rotating drillstrings. The behavior is represented by a system of two coupled nonlinear ordinary equations that are integrated numerically with a finite element analysis based on Timoshenko beam (TB) formulation combined to a modal condensation technique to reduce the computational time. Various nonlinear dynamical analysis tools, such as frequency spectrum, Poincarأ© maps, bifurcation diagrams, and Lyapunov exponents (LE), are used to characterizing the response. The DC section between two stabilizers is essentially modeled as a Jeffcott rotor with nonlinearity effects included. The model builds on two earlier models for the finite element formulation and the treatment of chaotic vibrations. Nonlinearity appears in the form of drillstring/borehole contact force, friction, and quadratic damping. The DC flexibility is included to allow investigation of bending modes. The analysis takes into account the length of time to steady state, number of subintervals, presence of rigid body modes, number of finite elements, and modal coordinates. Simulations results indicate that by varying operating conditions, a spectrum of behaviors from periodic to chaotic may be observed.
publisherThe American Society of Mechanical Engineers (ASME)
titleModal Reduction Technique for Predicting the Onset of Chaotic Behavior due to Lateral Vibrations in Drillstrings
typeJournal Paper
journal volume137
journal issue2
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.4028882
journal fristpage21003
journal lastpage21003
identifier eissn1528-8927
treeJournal of Vibration and Acoustics:;2015:;volume( 137 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record