| description abstract | Multiple highfidelity timeaccurate computational fluid dynamics simulations were performed to investigate the effects of upstream stator loading and rotor shock strength on vortex shedding characteristics in a singlestage transonic compressor. Three loadings on the upstream stator row of decreased, nominal, and increased loading in conjunction with three axial spacings of close, mid, and far were studied for this analysis. The timeaccurate urans code turbo was used to generate periodic, quarter annulus simulations of the blade row interaction (BRI) compressor rig. It was observed that vortex shedding was synchronized to the passing of a rotor bow shock. Results show that vortex strength increases linearly with stator loading and rotor bow shock strength. “Normal†and “large†shockinduced vortices formed on the stator trailing edge (TE) immediately after the shock passing, but the large vortices were strengthened at the TE due to a lowvelocity region on the suction surface. This lowvelocity region was generated upstream on the suction surface from a shockinduced thickening of the boundary layer or separation bubble. The circulation of the large vortices was greater than the normal vortices by a factor of 1.7, 1.83, and 2.04 for decreased, nominal, and increased deswirler loadings. At decreased loading, only 24% of the measured vortices were considered large, while at nominal loading 58% were large. A model was developed to predict shockinduced vortex circulation from a known rotor bow shock strength, stator diffusion factor, and nearwake parameters. The model predicts the average vortex circulation very well, with 5% difference between predicted and measured values. An understanding of the unsteady interactions associated with blade loading and rotor shock strength in transonic stages will help compressor designers account for unsteady flow physics at design and offdesign operating conditions. | |
