Show simple item record

contributor authorWang, J.
contributor authorWang, G. Z.
contributor authorXuan, F. Z.
contributor authorTu, S. T.
date accessioned2017-05-09T01:23:00Z
date available2017-05-09T01:23:00Z
date issued2015
identifier issn0094-9930
identifier otherpvt_137_02_021405.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/159454
description abstractIn this paper, the JR curves of two cracks (A508 HAZ crack 2 and A508/Alloy52Mb interface crack 3) located at the weakest region in an Alloy52M dissimilar metal welded joint (DMWJ) for connecting pipenozzle of nuclear pressure vessel have been measured by using single edgenotched bend (SENB) specimens with different crack depths a/W (different constraint). Based on the modified Tstress constraint parameter د„*, the equations of constraintdependent JR curves for the crack 2 and crack 3 were obtained. The predicted JR curves using different constraint equations derived from the three pairs of crack growth amount all agree with the experimental JR curves. The results show that the modified Tstress approach for obtaining constraintdependent JR curves of homogeneous materials can also be used for the DMWJs with highly heterogeneous mechanical properties (local strength mismatches) in nuclear power plants. The use of the constraintdependent JR curves may increase the accuracy of structural integrity design and assessment for the DMWJs of nuclear pressure vessels.
publisherThe American Society of Mechanical Engineers (ASME)
titleConstraint Dependent J R Curves of a Dissimilar Metal Welded Joint for Connecting Pipe Nozzle of Nuclear Pressure Vessel
typeJournal Paper
journal volume137
journal issue2
journal titleJournal of Pressure Vessel Technology
identifier doi10.1115/1.4028993
journal fristpage21405
journal lastpage21405
identifier eissn1528-8978
treeJournal of Pressure Vessel Technology:;2015:;volume( 137 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record