Show simple item record

contributor authorViselli, Anthony M.
contributor authorGoupee, Andrew J.
contributor authorDagher, Habib J.
date accessioned2017-05-09T01:22:45Z
date available2017-05-09T01:22:45Z
date issued2015
identifier issn0892-7219
identifier otheromae_137_04_041901.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/159385
description abstractA new floating wind turbine platform design called VolturnUS developed by the University of Maine uses innovations in materials, construction, and deployment technologies such as a concrete semisubmersible hull and a composite tower to reduce the costs of offshore wind. These novel characteristics require research and development prior to fullscale construction. This paper presents a unique offshore model testing effort aimed at derisking fullscale commercial projects by providing scaled global motion data, allowing for testing of materials representative of the fullscale system, and demonstrating fullscale construction and deployment methods. A 1:8scale model of a 6 MW semisubmersible floating wind turbine was deployed offshore Castine, ME, in June 2013. The model includes a fully operational commercial 20 kW wind turbine and was the first gridconnected offshore wind turbine in the U.S. The testing effort includes careful selection of the offshore test site, the commercial wind turbine that produces the correct aerodynamic thrust given the wind conditions at the test site, scaling methods, model design, and construction. A suitable test site was identified that produced scaled design load cases (DLCs) prescribed by the American Bureau of Shipping (ABS) Guide for Building and Classing Floating Offshore Wind Turbines. A turbine with a small rotor diameter was selected because it produces the correct thrust load given the wind conditions at the test site. Some representative data from the test are provided in this paper. Model test data are compared directly to fullscale design predictions made using coupled aeroelastic/hydrodynamic software. Scaled VolturnUS performance data during DLCs show excellent agreement with fullscale predictive models. Model test data are also compared directly without scaling against a numerical representation of the 1:8scale physical model for the purposes of numerical code validation. The numerical model results compare favorably with data collected from the physical model.
publisherThe American Society of Mechanical Engineers (ASME)
titleModel Test of a 1:8 Scale Floating Wind Turbine Offshore in the Gulf of Maine1
typeJournal Paper
journal volume137
journal issue4
journal titleJournal of Offshore Mechanics and Arctic Engineering
identifier doi10.1115/1.4030381
journal fristpage41901
journal lastpage41901
identifier eissn1528-896X
treeJournal of Offshore Mechanics and Arctic Engineering:;2015:;volume( 137 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record