description abstract | Nucleate boiling heat transfer depends on various aspects of the bubble ebullition, such as the bubble nucleation, growth and departure. In this work, a synchronized highspeed optical imaging and infrared (IR) thermography approach was employed to study the ebullition process of a single bubble on a hydrophilic surface. The boiling experiments were conducted at saturated temperature and atmospheric pressure conditions. Deionized (DI) water was used as the working fluid. The boiling device was made of a 385um thick silicon wafer. A thin film heater was deposited on one side, and the other side was used as the boiling surface. The onset of nucleate boiling (ONB) occurs at a wall superheat of خ”Tsup= 12 آ°C and an applied heat flux of q" = 35.9 kW/m2. The evolution of the wall heat flux distribution was obtained from the IR temperature measurements, which clearly depicts the existence of the microlayer near the threephase contact line of the nucleate bubble. The results suggest that, during the bubble growth stage, the evaporation in the microlayer region contributes dominantly to the nucleate boiling heat transfer; however, once the bubble starts to depart from the boiling surface, the microlayer quickly vanishes, and the transient conduction and the microconvection become the prevailing heat transfer mechanisms. | |