Show simple item record

contributor authorCasarin, Michele
contributor authorSglavo, Vincenzo M.
date accessioned2017-05-09T01:19:23Z
date available2017-05-09T01:19:23Z
date issued2015
identifier issn2381-6872
identifier otherfc_012_03_031005.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/158382
description abstractMicrotubular anodesupported solid oxide fuel cells (خ¼tSOFC) were created with a metallic coil embedded in the anode to act as current collector. The electrochemical performance was experimentally examined by comparing the power density (PD) of خ¼tSOFC with embedded coils of different turns per unit length and composition (nickel and palladium). It is shown that an increase in the turns per unit length results in a proportional current density increase and in a quadratic increment of PD. Additional performance improvement is found for the cell with palladium current collector due to the higher catalytic activity for hydrogen oxidation.
publisherThe American Society of Mechanical Engineers (ASME)
titleEffect of the Current Collector on Performance of Anode Supported Microtubular Solid Oxide Fuel Cells
typeJournal Paper
journal volume12
journal issue3
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4029875
journal fristpage31005
journal lastpage31005
identifier eissn2381-6910
treeJournal of Fuel Cell Science and Technology:;2015:;volume( 012 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record