Show simple item record

contributor authorDas, Debarun
contributor authorAl
contributor authorBanerjee, Rupak K.
date accessioned2017-05-09T01:15:09Z
date available2017-05-09T01:15:09Z
date issued2015
identifier issn0148-0731
identifier otherbio_137_05_051008.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/157115
description abstractMagnetophoretic immunoassay is a widely used technique in labonchip systems for detection and isolation of target cells, pathogens, and biomolecules. In this method, target pathogens (antigens) bind to specific antibodies coated on magnetic microbeads (mMBs) which are then separated using an external magnetic field for further analysis. Better capture of mMB is important for improving the sensitivity and performance of magnetophoretic assay. The objective of this study was to develop a numerical model of magnetophoretic separation in electroosmotic flow (EOF) using magnetic field generated by a miniaturized magnet and to evaluate the capture efficiency (CE) of the mMBs. A finitevolume solver was used to compute the trajectory of mMBs under the coupled effects of EOF and external magnetic field. The effect of steady and time varying (switching) electric fields (150–450 V/cm) on the CE was studied under reduced magnetic field strength. During switching, the electric potential at the inlet and outlet of the microchannel was reversed or switched, causing reversal in flow direction. The CE was a function of the momentum of the mMB in EOF and the applied magnetic field strength. By switching the electric field, CE increased from 75% (for steady electric field) to 95% for lower electric fields (150–200 V/cm) and from 35% to 47.5% for higher electric fields (400–450 V/cm). The CE was lower at higher EOF electric fields because the momentum of the mMB overcame the external magnetic force. Switching allowed improved CE due to the reversal and decrease in EOF velocity and increase in mMB residence time under the reduced magnetic field strength. These improvements in CE, particularly at higher electric fields, made sequential switching of EOF an efficient separation technique of mMBs for use in high throughput magnetophoretic immunoassay devices. The reduced size of the magnet, along with the efficient mMB separation technique of switching can lead to the development of portable device for detection of target cells, pathogens, and biomolecules.
publisherThe American Society of Mechanical Engineers (ASME)
titleEnhanced Capture of Magnetic Microbeads Using Combination of Reduced Magnetic Field Strength and Sequentially Switched Electroosmotic Flow—A Numerical Study
typeJournal Paper
journal volume137
journal issue5
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4029748
journal fristpage51008
journal lastpage51008
identifier eissn1528-8951
treeJournal of Biomechanical Engineering:;2015:;volume( 137 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record