| description abstract | Geometric constraint programming (GCP) is an approach to synthesizing planar mechanisms in the sketching mode of commercial parametric computeraided design software by imposing geometric constraints using the software's existing graphical user interface. GCP complements the accuracy of analytical methods with the intuition developed from graphical methods. Its applicability to motion generation, function generation, and path generation for finitely separated positions has been previously reported. By implementing existing, wellknown theory, this technical brief demonstrates how GCP can be applied to kinematic synthesis for motion generation involving infinitesimally and multiply separated positions. For these cases, the graphically imposed geometric constraints alone will in general not provide a solution, so the designer must parametrically relate dimensions of entities within the graphical construction to achieve designs that automatically update when a defining parameter is altered. For three infinitesimally separated positions, the designer constructs an acceleration polygon to locate the inflection circle defined by the desired motion state. With the inflection circle in place, the designer can rapidly explore the design space using the graphical second Bobillier construction. For multiply separated position problems in which only two infinitesimally separated positions are considered, the designer constrains the instant center of the mechanism to be in the desired location. For example, fourbar linkages are designed using these techniques with three infinitesimally separated positions and two different combinations of four multiply separated positions. The ease of implementing the techniques may make synthesis for infinitesimally and multiply separated positions more accessible to mechanism designers and undergraduate students. | |
