Show simple item record

contributor authorBأ¼rzle, Wilfried
contributor authorMazza, Edoardo
contributor authorMoore, John J.
date accessioned2017-05-09T01:05:42Z
date available2017-05-09T01:05:42Z
date issued2014
identifier issn0148-0731
identifier otherbio_136_11_111009.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/154099
description abstractPuncture testing has been applied in several studies for the mechanical characterization of human fetal membrane (FM) tissue, and significant knowledge has been gained from these investigations. When comparing results of mechanical testing (puncture, inflation, and uniaxial tension), we have observed discrepancies in the rupture sequence of FM tissue and significant differences in the deformation behavior. This study was undertaken to clarify these discrepancies. Puncture experiments on FM samples were performed to reproduce previous findings, and numerical simulations were carried out to rationalize particular aspects of membrane failure. The results demonstrate that both rupture sequence and resistance to deformation depend on the samples' fixation. Soft fixation leads to slippage in the clamping, which reduces mechanical loading of the amnion layer and results in chorion rupturing first. Conversely, the stiffer, stronger, and less extensible amnion layer fails first if tight fixation is used. The results provide a novel insight into the interpretation of ex vivo testing as well as in vivo membrane rupture.
publisherThe American Society of Mechanical Engineers (ASME)
titleAbout Puncture Testing Applied for Mechanical Characterization of Fetal Membranes
typeJournal Paper
journal volume136
journal issue11
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4028446
journal fristpage111009
journal lastpage111009
identifier eissn1528-8951
treeJournal of Biomechanical Engineering:;2014:;volume( 136 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record