| description abstract | In recent papers, orifice models have been developed to calculate the amount of ingestion, or ingress, that occurs through gasturbine rim seals. These theoretical models can be used for externally induced (EI) ingress, where the pressure differences in the main gas path are dominant, and for rotationally induced (RI) ingress, where the effects of rotation in the wheel space are dominant. Explicit “effectiveness equations,†derived from the orifice models, are used to express the flow rate of sealing air in terms of the sealing effectiveness. These equations contain two unknown terms: خ¦min, a sealing flow parameter, and خ“c, the ratio of the discharge coefficients for ingress and egress. The two unknowns can be determined from concentration measurements in experimental rigs. In this paper, maximum likelihood estimation is used to fit the effectiveness equations to experimental data and to determine the optimum values of خ¦min and خ“c. The statistical model is validated numerically using noisy data generated from the effectiveness equations, and the simulated tests show the dangers of drawing conclusions from sparse data points. Using the statistical model, good agreement between the theoretical curves and several sets of previously published effectiveness data is achieved for both EI and RI ingress. The statistical and theoretical models have also been used to analyze previously unpublished experimental data, the results of which are included in separate papers. It is the ultimate aim of this research to apply the effectiveness data obtained at rig conditions to engineoperating conditions. | |
