Show simple item record

contributor authorHerrmann, Tarrah A.
contributor authorSiefert, Andrew W.
contributor authorPressman, Gregg S.
contributor authorGollin, Hannah R.
contributor authorTouchton, Jr. ,Steven A.
contributor authorSaikrishnan, Neelakantan
contributor authorYoganathan, Ajit P.
date accessioned2017-05-09T00:56:47Z
date available2017-05-09T00:56:47Z
date issued2013
identifier issn0148-0731
identifier otherbio_135_09_094502.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151094
description abstractMitral annular calcification (MAC) involves calcium deposition in the fibrous annulus supporting the mitral valve (MV). When calcification extends onto the leaflets, valve opening can be restricted. The influence of MAC MV geometry on Doppler gradients is unknown. This study describes a novel methodology to rapidprototype subjectspecific MAC MVs. Replicated valves were used to assess the effects of distorted annularleaflet geometry on Dopplerderived, transmitral gradients in comparison to direct pressure measurements and to determine if transmitral gradients vary according to measurement location. Threedimensional echocardiography data sets were selected for two MAC MVs and one healthy MV. These MVs were segmented and rapid prototyped in their middiastolic configuration for in vitro testing. The effects of MV geometry, measurement modality, and measurement location on transmitral pressure gradient were assessed by Doppler and catheter at three locations along the MV's intercommissural axis. When comparing dimensions of the rapidprototyped valves to the subject echocardiography data sets, mean relative errors ranged from 6.2% to 35%. For the evaluated MVs, Doppler pressure gradients exhibited good agreement with cathetermeasured gradients at a variety of flow rates, though with slight systematic overestimation in the recreated MAC valves. For all of the tested MVs, measuring the transmitral pressure gradient at differing valve orifice positions had minimal impact on observed gradients. Upon the testing of additional normal and calcific MVs, these data may contribute to an improved clinical understanding of MACrelated mitral stenosis. Moreover, they provide the ability to statistically evaluate between measurement locations, flow rates, and valve geometries for Dopplerderived pressure gradients. Determining these end points will contribute to greater clinical understanding for the diagnosis MAC patients and understanding the use and application of Doppler echocardiography to estimate transmitral pressure gradients.
publisherThe American Society of Mechanical Engineers (ASME)
titleIn Vitro Comparison of Doppler and Catheter Measured Pressure Gradients in 3D Models of Mitral Valve Calcification
typeJournal Paper
journal volume135
journal issue9
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4024579
journal fristpage94502
journal lastpage94502
identifier eissn1528-8951
treeJournal of Biomechanical Engineering:;2013:;volume( 135 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record