Show simple item record

contributor authorKondratko, Jaclyn
contributor authorDuenwald
contributor authorLakes, Roderic
contributor authorVanderby, Ray
date accessioned2017-05-09T00:56:26Z
date available2017-05-09T00:56:26Z
date issued2013
identifier issn0148-0731
identifier otherbio_135_1_011001.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/150957
description abstractTendons function to transmit loads from muscle to move and stabilize joints and absorb impacts. Functionality of lacerated tendons is diminished, however clinical practice often considers surgical repair only after 50% or more of the tendon is lacerated, the “50% rule.â€‌ Few studies provide mechanical insight into the 50% rule. In this study cyclic and static stress relaxation tests were performed on porcine flexor tendons before and after a 0.5, 1.0, 2.0, or 2.75 mm deep transverse, midsubstance laceration. Elastic and viscoelastic properties, such as maximum stress, change in stress throughout each test, and stiffness, were measured and compared preand postlaceration. Nominal stress and stiffness parameters decreased, albeit disproportionately in magnitude, with increasing percent loss of crosssectional area. Conversely, mean stress at the residual area (determined using remaining intact area at the laceration cross section) exhibited a marked increase in stress concentration beginning at 47.2% laceration using both specified load and constant strain analyses. The marked increase in stress concentration beginning near 50% laceration provides mechanical insight into the 50% rule. Additionally, a drastic decrease in viscoelastic stress parameters after only an 8.2% laceration suggests that timedependent mechanisms protecting tissues during impact loadings are highly compromised regardless of laceration size.
publisherThe American Society of Mechanical Engineers (ASME)
titleMechanical Compromise of Partially Lacerated Flexor Tendons
typeJournal Paper
journal volume135
journal issue1
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4023092
journal fristpage11001
journal lastpage11001
identifier eissn1528-8951
treeJournal of Biomechanical Engineering:;2013:;volume( 135 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record