Exact Frequency Analysis of a Rotating Cantilever Beam With Tip Mass Subjected to Torsional-Bending Vibrations

Abstract

An exact frequency analysis of a rotating beam with an attached tip mass is addressed in this paper while the beam undergoes coupled torsional-bending vibrations. The governing coupled equations of motion and the corresponding boundary condition are derived in detail using the extended Hamilton principle. It has been shown that the source of coupling in the equations of motion is the rotation and that the equations are linked through the angular velocity of the base. Since the beam-tip-mass system at hand serves as the building block of many vibrating gyroscopic systems, which require high precision, a closed-form frequency equation of the system should be derived to determine its natural frequencies. The frequency analysis is the basis of the time domain analysis, and hence, the exact frequency derivation would lead to accurate time domain results, too. Control strategies of the aforementioned gyroscopic systems are mostly based on their resonant condition, and hence, acquiring knowledge about their exact natural frequencies could lead to a better control of the system. The parameter sensitivity analysis has been carried out to determine the effects of various system parameters on the natural frequencies. It has been shown that even the undamped systems undergoing base rotation will have complex eigenvalues, which demonstrate a damping-type behavior.