| contributor author | Licai Fu | |
| contributor author | Jun Yang | |
| contributor author | Qinling Bi | |
| contributor author | Weimin Liu | |
| date accessioned | 2017-05-09T00:47:05Z | |
| date available | 2017-05-09T00:47:05Z | |
| date copyright | October, 2011 | |
| date issued | 2011 | |
| identifier issn | 0742-4787 | |
| identifier other | JOTRE9-28786#041602_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/147671 | |
| description abstract | The dry-sliding tribological properties of the dendrite composite eutectic Fe-B alloys (Fe94.3 B5.7 , Fe75 B25 Fe67 B33 ) were studied comparatively with various sliding speeds. The friction coefficient of the Fe-B alloy changes slightly with the boron content. The wear rate of the Fe94.3 B5.7 alloy with about 30 vol. % dendrite t-Fe2 B is only one third of Fe75 B25 alloy with 15 vol. % dendrite and Fe67 B33 alloy with 90 vol. % dendrite in the high sliding speed. First, a hard t-Fe2 B phase reduced the wear of the Fe-B alloy directly. Second, the compactly oxide layers resulting from oxidation of the α-Fe on the worn surfaces also decreases the wear rate of Fe-B alloys. On the whole, the wear rate of the Fe94.3 B5.7 is lower than Fe67 B33 and Fe75 B25 . | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Improved Wear Resistance of Dendrite Composite Eutectic Fe-B Alloy | |
| type | Journal Paper | |
| journal volume | 133 | |
| journal issue | 4 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4005067 | |
| journal fristpage | 41602 | |
| identifier eissn | 1528-8897 | |
| keywords | Friction | |
| keywords | Wear | |
| keywords | Composite materials | |
| keywords | Alloys AND Wear resistance | |
| tree | Journal of Tribology:;2011:;volume( 133 ):;issue: 004 | |
| contenttype | Fulltext | |
