Show simple item record

contributor authorShou-Jun Chen
contributor authorYi Zhang
contributor authorLian-Xin Gao
contributor authorQiang Li
contributor authorQi An
date accessioned2017-05-09T00:40:33Z
date available2017-05-09T00:40:33Z
date copyrightJune, 2010
date issued2010
identifier issn0094-9930
identifier otherJPVTAS-28533#031202_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/144681
description abstractThis paper presents a new analytical method that can calculate the load distribution on the thread teeth in cylindrical pipe threaded connection. The new method was developed by analyzing each male and female thread tooth from the connection on the basis of elastic mechanics. By using this method, the load distribution on each thread tooth can be calculated with the tightening torque and thread numbers. By applying the new method on the sample of API 88.9 mm round threaded connection, the obtained results show that the load on thread tooth mainly concentrates on the last four or five threads engaged. By using the finite element analysis method to the same sample validates the new method. The new method proposed in this paper is practical and convenient because it can be applied to calculate the load and deformation on each thread tooth just with tightening torque and thread numbers, which is easier to implement in practice.
publisherThe American Society of Mechanical Engineers (ASME)
titleLoading Analysis on the Thread Teeth in Cylindrical Pipe Thread Connection
typeJournal Paper
journal volume132
journal issue3
journal titleJournal of Pressure Vessel Technology
identifier doi10.1115/1.4000729
journal fristpage31202
identifier eissn1528-8978
keywordsStress
keywordsThread AND Deformation
treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record