Show simple item record

contributor authorCevat Erisken
contributor authorDilhan M. Kalyon
contributor authorHongjun Wang
date accessioned2017-05-09T00:36:30Z
date available2017-05-09T00:36:30Z
date copyrightSeptember, 2010
date issued2010
identifier issn0148-0731
identifier otherJBENDY-27166#091013_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/142558
description abstractThe complex micro-/nanostructure of native cartilage-to-bone insertion exhibits gradations in extracellular matrix components, leading to variations in the viscoelastic and biomechanical properties along its thickness to allow for smooth transition of loads under physiological movements. Engineering a realistic tissue for osteochondral interface would, therefore, depend on the ability to develop scaffolds with properly graded physical and chemical properties to facilitate the mimicry of the complex elegance of native tissue. In this study, polycaprolactone nanofiber scaffolds with spatially controlled concentrations of β-tricalcium phosphate nanoparticles were fabricated using twin-screw extrusion-electrospinning process and seeded with MC3T3-E1 cells to form osteochondral tissue constructs. The objective of the study was to evaluate the linear viscoelastic and compressive properties of the native bovine osteochondral tissue and the tissue constructs formed in terms of their small-amplitude oscillatory shear, unconfined compression, and stress relaxation behavior. The native tissue, engineered tissue constructs, and unseeded scaffolds exhibited linear viscoelastic behavior for strain amplitudes less than 0.1%. Both native tissue and engineered tissue constructs demonstrated qualitatively similar gel-like behavior as determined using linear viscoelastic material functions. The normal stresses in compression determined at 10% strain for the unseeded scaffold, the tissue constructs cultured for four weeks, and the native tissue were 0.87±0.08 kPa, 3.59±0.34 kPa, and 210.80±8.93 kPa, respectively. Viscoelastic and biomechanical properties of the engineered tissue constructs were observed to increase with culture time reflecting the development of a tissuelike structure. These experimental findings suggest that viscoelastic material functions of the tissue constructs can provide valuable inputs for the stages of in vitro tissue development.
publisherThe American Society of Mechanical Engineers (ASME)
titleViscoelastic and Biomechanical Properties of Osteochondral Tissue Constructs Generated From Graded Polycaprolactone and Beta-Tricalcium Phosphate Composites
typeJournal Paper
journal volume132
journal issue9
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4001884
journal fristpage91013
identifier eissn1528-8951
keywordsBiomechanics
keywordsShear (Mechanics)
keywordsBiological tissues
keywordsCartilage
keywordsCompression
keywordsBone
keywordsFunctions
keywordsViscoelastic materials AND Stress
treeJournal of Biomechanical Engineering:;2010:;volume( 132 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record